Rolex Daytona is a luxury watch that is well-known for its accuracy and reliability. However, setting the watch correctly can be a daunting task for those who are new to it. In this article, we will guide you through the steps on how to set your Rolex Daytona watch correctly.
Step 1: Unscrew the Crown
The crown is the knob located on the side of your Rolex Daytona watch. To set the time, you need to unscrew the crown first by turning it counterclockwise until it pops out.
Step 2: Set the Time
Once the crown is unscrewed, you can start setting the time. Pull the crown out to the first position, and turn it clockwise or counterclockwise to adjust the minute hand to the correct time. If you need to adjust the hour hand, pull the crown out to the second position and turn it until the correct time is set.
Step 3: Set the Date and Day
If your Rolex Daytona watch has a date and day function, you can set them by pulling the crown out to the second position and turning it clockwise or counterclockwise. The date changes at midnight, while the day changes at around 2 am. To avoid damaging the mechanism, make sure to set the date and day only when the hands are at the 6 o’clock position.
Step 4: Screw the Crown Back In
After setting the time, date, and day, push the crown back in and screw it back into place by turning it clockwise. Make sure it is securely tightened to maintain the watch’s water resistance.
Step 5: Wind the Watch
If your Rolex Daytona watch is an automatic model, it will need to be wound manually by turning the crown clockwise for about 30 to 40 times before wearing it. This action will help the watch run smoothly and accurately.
In conclusion, setting your Rolex Daytona watch can be a simple process if you follow these steps. Remember to be gentle with the crown and avoid turning it too forcefully. With proper care and maintenance, your Rolex Daytona watch can last for generations.
